This is a correct grade M1 Garand rifle WRA 1636520.

This is one of the last Win-13 M1 rifles to be produced. This rifle has a full WRA trigger grouping of late WRA parts and a solid blue pin. The front sight has a double punch mark and is flared. The rear sights have open arrows, a lock bar, and a double track. The clip latch is rounded. The gas cylinder is bluish-black in color with a wide base. The lower band is arched and machined with a solid blue pin. The rear handguard is stamped flat with a punch mark on the inside. The crown of the barrel is like new, and it appears to have never been fired except during test firing. All parts show the machine marks from production. The follower arm has a large bevel with no punch marks. The op-rod catch is two-toned with a white pin and has rounded cuts. The bullet guide has been punch marked. The barrel has been punched to where you can still see where the bare metal was exposed during manufacturing.

The bore of this rifle is in very good condition with no rust; it is in the white.

Muzzle Gauge: 1

Throat Gauge: 2

Receiver: P/N D28291WIN-13

Bolt: D28287-1W.R.A.

Op-Rod: D35382W.R.A.

Trigger Housing: D28290-W.R.A.

Trigger Guard: C46025W.R.A.

Hammer: C46008-1W.R.A.

Safety: WRA-1

The stock is a GI stock with some dings and scratches.

Markings: The gas cylinder screw is stamped with "O" and "P." The stock is stamped with the proof and DOD markings as well as "WRA GHD." The follower is stamped with "13" on the end and the 1 is straight.

Sold as is.

All photos can be viewed here.