These rifles are duplicate serial number M1 Garands drill rifle "Win-13" WRA 1636507 and ceremonial rifle SA 1636507.

M1 Garand Drill Rifle "Win-13" WRA 1636507:

This is a drill rifle and, as such, is a non-functional M1 Garand rifle. It is not safe to repair/fire. CMP does not condone the repairation of drill rifles into functional rifles, and that risk is fully assumed by the customer and gunsmith in the event it takes place.

The barrel of this rifle is a WRA barrel, as is evident by the symbol, and is welded to the receiver as well as plugged.

The gas cylinder of this rifle is welded to the gas cylinder screw.

Receiver: D28291WIN-13

Bolt: D28287-2SA RE5A

Op-Rod: D35382 3 SA

Trigger Housing: D28290-12-SA

Hammer: C46008-3 SA

Safety: SA_11

Markings: Cast marking on trigger and bullet guide; Stamped "2" on top of trigger guard; Proof marking, indentation where a button used to be screwed in, and "S.A. S" Cartouche on and sticker in channel of stock; Stamped "A" on op-rod catch; Stamped "PB" and punch mark on gas cylinder screw; Stamped "Q" on bottom and "l" on top of gas cylinder; Stamped "J" on op-rod; Additional stamps on bottom of receiver.

Other Information: Unmodified op-rod; Early op-rod catch.

The wood of this rifle is GI wood with a thorough amount of imperfections.

The bolt of this rifle is missing parts and is non-functional.

All photos of this rifle can be viewed here.

M1 Garand Ceremonial Rifle SA 1636507:

This rifle is a ceremonial rifle and is a functional M1 Garand rifle; however, this rifle is only for firing of .30-06 blank rounds. This rifle is not safe to fire actual .30-06 rounds. As with drill rifles, CMP does not condone the repair of ceremonial rifles into functional rifles, and that risk is fully assumed by the customer and gunsmith in the event that it happens.

Barrel: S-A-5-47

The breech of this rifle is no in the white.

Receiver: D 28291 27 030R

Bolt: D28287-12SA B5B

Op-Rod: ?35382 9-SA (Part of the drawing number is obscured by modification.)

Trigger Housing: D28290-12-SA

Hammer: C46008-5 SA

Safety: SA_11

Markings: Cast marking on trigger, bullet guide, and follower arm; DOD and proof marking on and stamp in channel of stock; Stamped "11" on follower; Stamped "O" and "P" on gas cylinder screw; Additional stamps on bottom of receiver.

The wood of this rifle is GI wood with some imperfections. The wood has all been painted completely white, and the front handguard has a large crack in it.

The BFA is included with this rifle, and this rifle has no gas cylinder lock.

All photos of this rifle can be viewed here.

Rifles sold as is.