Remington Model 40-X Consecutive Serial Numbers 40326B and 40327B

Remington 40-X Center Fire 

Serial Number 40326B

Highlights:  

Muzzle: 0+

Throat: 1+

Barrel: Factory Heavy Barrel

Bore is bright

Receiver: Stamped 40-X but is set up for internal magazine and has stripper clip cut

Bolt: Has SN inscribed on underside

Floorplate: Custom

Markings & Other information: Consecutive Pair w/ 40327B

This rifle has NOT been test fired due to issues with the trigger.

This rifle is in overall very good condition. The blued finish shows very little wear throughout. The rifle is built on a 40-X action that has the stripper clip relief and bottom machining so as to feed from a magazine. The rifle has a Canjar trigger installed. This trigger is EXTREMELY light and fails the bump test. For this reason we have not test fired this rifle. The barrel is a factory heavy contour that is stamped 7.62 NATO. The bore is bright w/ good T/M readings. The rifle headspaces on .308 WIN gauges. The rifle is in a custom stock that has an adjustable butt plate.

Remington 40-X Center Fire

Serial Number 40327B

Highlights:  

Muzzle: 1

Throat: 2+

Barrel: Factory Heavy Barrel

Bore is bright

Receiver: Stamped 40-X but is set up for internal magazine and has stripper clip cut

Bolt: No bolt w/ rifle

Floorplate: Factory 40-X

Markings & Other information: Consecutive Pair w/ 40326B

This rifle has NOT been test fired due to lack of bolt.

This rifle is in overall very good condition. The blued finish shows very little wear throughout. The rifle is built on a 40-X action that has the stripper clip relief and bottom machining so as to feed from a magazine. The barrel is a factory heavy contour that is stamped 7.62 NATO. The bore is bright w/ good T/M readings. No bolt was found for the rifle so headspace is unknown, but the chamber is clean. The rifle is in a standard 40-X stock that has had the length of pull extended using wooden shims.